Indian Journal of Cryogenics

Table of Contents

• RESEARCH ARTICLE

  Conceptualization of a dual-mode LOX-LIN plant at BARC

  • Author: Anindya Chakravarty, Mohananand M. Jadhav, Abhilash Chakravarty, Naseem A. Ansari, Rajendran S. Menon, Tejas R. Rane, Sandeep R. Nair, Jitendra Kumar, Naveen Kumar, Satish K. Bharti, Ankit Jain, V. Sugadan
  • DOI: 10.5958/2349-2120.2022.00001.2

• Vapour cooled current leads-operations and control for Nb3 Sn coil test

  • Author: Rohit Panchal, Rakesh Patel, Dashrath Sonara, Gaurang Mahesuria, Hiren Nimavat, Atul Garg, Dikens Christian, Pradip Panchal, Gaurav Purwar, Arvind Kumar Tomar, M. Ghate, P. Raj, Upendra Prasad, Vipul Tanna
  • DOI: 10.5958/2349-2120.2022.00002.4

• Cooling plates heat loss estimation for 50 kJ HTS SMES using coupled magneto-thermal transient analysis with a varying ramp rate

  • Author: Ankit Anand, Abhay Singh Gour, T. S. Datt, Vutukuru Vasudeva Rao
  • DOI: 10.5958/2349-2120.2022.00003.6

• Conceptual design of open source IoT based software solution for Cryogenic experiments

  • Author: Ramesh Joshi, H M Jadav, Sunil Kumar, Vishnu Patel
  • DOI: 10.5958/2349-2120.2022.00004.8

• Preliminary studies on the development of planar inductor-based sensors for RRR measurement of thin-film Nb-coated samples

  • Author: Namitha Venugopal, K H Abdul Nazer, Hrithik Krishna Raj, Pankaj Sagar
  • DOI: 10.5958/2349-2120.2022.00005.X

• Comparative studies on journal bearings for turboexpanders of a dual mode LOX-LIN plant at BARC, Mumbai

  • Author: Ankit Jain, Mohananand Jadhav, Anindya Chakravarty, Mukesh Goyal, Naveen Kumar, V. Sugadan
  • DOI: 10.5958/2349-2120.2022.00006.1

• Development and testing of joints in high temperature superconducting power cable

  • Author: Isaac de Souza, Harris K. Hassan, Abhik Sarkar, Maalika Sarkar, Abhay Singh Gour, Vutukuru Vasudeva Rao
  • DOI: 10.5958/2349-2120.2022.00007.3

• Extraction of high purity oxygen using waste gas recovery of existing liquid nitrogen plant

  • Author: K V Srinivasan, Vijay Arolkar, John Jesudasan
  • DOI: 10.5958/2349-2120.2022.00008.5

• Design and manufacturing of ITER cryolines and warmlines: an Indian contribution

  • Author: Himanshu Kapoor, Ketan Choukekar, Uday Kumar, Vikas Gaur, Bikash Dash, Shk Madeenavalli, Nitin Shah, Hitensinh Vaghela, Mohit Jadon, Jean-Luc Fournier, Lahcene Benkheira, Adrien Forgeas, David Grillot, Biswanath Sarkar, Rajkumar Panjwani, Bhumika Joshi, Hardik Vyas, Hiren Kanzaria, Vijay Gehani, Dipali Vaidya, Gyanchand Tawanee, Kirit Patel, K V Murgan, Sanjay Gajera, Ajay Sisodiya
  • DOI: 10.5958/2349-2120.2022.00009.7

• VECC penning trap operation at Cryogenic temperature

  • Author: P. Das, J. Nandi, A. K. Sikdar, N. Chaddha, A. Mishra, A. Reza, K. Banerjee, A. Ray
  • DOI: 10.5958/2349-2120.2022.00010.3

• Magnetic shield effect for 8 MW high temperature superconducting synchronous motor

  • Author: Divya Kumar Sharma, V A S Muralidhar Bathula, Abhay Singh Gour
  • DOI: 10.5958/2349-2120.2022.00011.5

• Comparative study and sensitivity analysis on different coil design approach for 1 T HTS extremity MRI magnet

  • Author: Sumit Kumar Chand, Abhay Singh Gour, Tripti Sekhar Datta
  • DOI: 10.5958/2349-2120.2022.00012.7

• Analysis of active pressurization methods for a cryogenic propellant tank

  • Author: Vishnu Viswanath, Deepak Kumar Agarwal, John Tharakan
  • DOI: 10.5958/2349-2120.2022.00013.9

• Numerical modelling of a pressure wave refrigerator

  • Author: S. Zafar, T. K. Nandi
  • DOI: 10.5958/2349-2120.2022.00014.0

• Thermal performance assessment of tungsten based magneto-resistive heat switch at different oblique plane angles for space application

  • Author: Gautam Ranjan, Yash Bhausaheb Desale, K. S. Patel, B. Kiran Naik, Vivek Kumar Singh
  • DOI: 10.5958/2349-2120.2022.00015.2

• Enhancement in energy resolution of silicon surface barrier detector at low temperature

  • Author: J. Nandi, A. K. Sikdar, Deepak Pandit, P. Das, A. Ray
  • DOI: 10.5958/2349-2120.2022.00016.4

• Development of lab scale conduction cooled HTS magnets

  • Author: Piyush Raj, Anees Bano, Arun Panchal, Pankaj Varmora, Deven Kanabar, Bhadresh Parghi, Upendra Prasad
  • DOI: 10.5958/2349-2120.2022.00017.6

• Machine learning algorithms for two-phase heat transfer and pressure drop estimation for Joule Thomson Cryocoolers

  • Author: Dasari Venkatesh, G. Venkatarathnam
  • DOI: 10.5958/2349-2120.2022.00018.8

• Numerical simulation of high temperature gas condensation in a flowing Cryogenic liquid for semicryogenic engine applications

  • Author: Anant Singhal, Deepak K. Agarwal, Atul Srivastava, M. D. Atrey
  • DOI: 10.5958/2349-2120.2022.00019.X

• 8-Channel cryogenic temperature monitors with RS-232 interface & TRV data-logger

  • Author: Joby Antony, Rajesh Nirdoshi
  • DOI: 10.5958/2349-2120.2022.00020.6

• Development of a distillation column for a dual-mode LOX-LIN plant at BARC

  • Author: Abhilash Chakravarty, Anindya Chakravarty, Mukesh Goyal, V. Sugadan
  • DOI: 10.5958/2349-2120.2022.00021.8

• Effect of magnetic fields due to electric currents in an HTS power cable and estimation of stress

  • Author: Isaac de Souza, Ankit Anand, Abhay Singh Gour, Vutukuru Vasudeva Rao
  • DOI: 10.5958/2349-2120.2022.00022.X

• Investigation of helium flow impedance issues in the capillary based experimental cryostats

  • Author: K V Srinivasan, Vijay Arolkar, Suvasis Swain, K A Jaison
  • DOI: 10.5958/2349-2120.2022.00023.1

• Numerical analysis of the effect of nanoparticles on thermal characteristics of biological tissue during a cryosurgery

  • Author: Rajeev Kumar Mandal, Sumit Kumar
  • DOI: 10.5958/2349-2120.2022.00024.3

• Performance evaluation of sintered and stacked mesh regenerator for stirling cycle based LN2 plant

  • Author: Praveen Topagi, S. Prabhakara, S. L. Bapat, M. D. Atrey
  • DOI: 10.5958/2349-2120.2022.00025.5

• Performance prediction of cryogenic/semi-cryogenic rocket engines by using multi-sensor data fusion techniques

  • Author: Mallappa, S. Ramesh, D. Gilbert Chandra, T. K. Nandi
  • DOI: 10.5958/2349-2120.2022.00026.7

• Cryogenic characterisation of polyurethane foam for thermal insulation of cryogenic tanks of launch vehicles

  • Author: A Suresh Kumar, P S Nikhil, T Antony Prabhu, A M Nallaperumal, R Muraleekrishnan, S A Ilangovan
  • DOI: 10.5958/2349-2120.2022.00027.9

• EDITORIAL

  Editorial